Star Projector Lights
Star Projector Lights
Star Projector Lights
Star Projector Lights
Star Projector Lights
Star Projector Lights
1 / 6
Star Projector Lights
Star Projector Lights
Star Projector Lights
Star Projector Lights
Star Projector Lights
Star Projector Lights
0% OFF

Upgraded Wireless Lights Switch and Receiver Kit, No in-Wall Wiring Required,Wall Switch Remote Control Lighting Fixture for Ceiling Lights,Aasy to install for Stone Wall,Glass,Wooden board,Iron Gate,On the table

Upgraded Wireless Lights Switch and Receiver Kit, No in-Wall Wiring Required,Wall Switch Remote Control Lighting Fixture for Ceiling Lights,Aasy to install for Stone Wall,Glass,Wooden board,Iron Gate,On the table

$8.60
0 sold
2 Wireless(1Switch )+1 Receiver
Qty 10 in stock

Package include:
Receiver
Wall Switch Remote control ( include battery )
Push-in Wire Terminal (2 pieces )
Screws(2 pieces )

Note : This Product NO WIFI Function. Only RF 433Mhz Wireless Function.

Remote control Specifications:
Operating Frequency: 433MHz.
Battery Model: CR2032 Alkaline Battery
Material: HDPE(Type2) Plastic.
Coding Specification: 1527.
Distance: Indoor (20 Meters/65 Feets) , Outdoor (80 Meters/262 Feets).
Color: White.
Size(L/W/H): 86 standard size (86mm x 86mm x 13mm).
Weight: 46g

Receiver Specifications:
Working voltage : AC 90V~250V
Quiescent Current : <5MA
Max current : 10A
Max load : 2200W
RF frequency : 433MHz
Working temperature : -30~+80
Receiving Sensitivity : >97dbm
Amount of storage remote controls : 25 pieces
Support encoding : 1527 Leaning code
RF Operating mode : ASK superheterodyne wireless reception
Receiving range : Open space is more than 50 meters
Color: White.
Size(L/W/H): 50mm x 37mm x 20mm.
Weight: 30g

About this item:
Save costs, save you money: Simple installation; wired between the power and lighting fixtures; no in-wall wiring needed; expand your lighting system freely and won't affect the existing system.

Aasy to install: Wireless Lights Switch mountable switch mounts anywhere; compact receiver switch kit fits limited space like rose/canopy, electrical junction box, switch box,Stone Wall,Glass,Wooden board,Iron Gate,On the table.

100 Feet RF Wireless Remote Range: Strong RF signal works through walls and doors without any interference; does not require line of sight while using; up to 100ft range in open areas.

Programmable and Expandable: Available to add more wall switches, receiver kits, extra handheld remotes, outlets and light sockets (Same Model Only); transmitter wall switch and receiver have been pre-programmed for immediate use

Note :
1. This Product NO WIFI Function. Only RF 433Mhz Wireless Function.
2. Do not use this remote control to clone other remote controls,you will lose the built-in 1527 encoding.
3. This product is not suitable for fans with speed regulation function.

Set up:
Set up Toggle (The same button realizes the function of ON and OFF)
1. Press the learning button(on the Receiver “KEY” ) twice. Wait for 3 seconds;
2. Press one button on the remote control. Wait for 3 seconds. Succeed.

Set up Momentary (Reset Switch)
1. Press the learning button(on the Receiver“KEY” ) once. Wait for 3 seconds;
2. Press one button on the remote control. Wait for 3 seconds. Succeed.

Set up Latched (“A ON ” “B OFF”)
1. Press the learning button(on the Receiver “KEY”) triple. Wait for 3 seconds;
2. Press button "A" on the remote control. Wait for 3 seconds.
3. Press button "B" on the remote control. Wait for 3 seconds. Succeed.

Q & A
Q : Can one receiver be controled by diffrent wall switch?
A : Yes, each receiver can add about 25 wall switch .

Q : Can one wall Switch control 2 receivers individually ?
A :Yes, wall switch with 2 buttons can control 2 receivers , wall switch with 3 buttons can control 3 receivers.

Q : Can 1 button on wall switch control 2 receivers at the same time?
A : Yes , You can program it by yourself. For example, matched Button "1" with receiver "1",and then matched Button "1" with receiver "2" too. This Button "1" can control receiver "1" and receiver "2" at the same time.